Install guide · VMware ESXi
Deploy VEX-NX to ESXi without Workstation.
Send the VEX-NX OVA straight from your Windows PC to an ESXi host with VMware OVF Tool. It’s more reliable than uploading a large OVA through the browser, and you don’t need VMware Workstation.
- 1
Prepare
- On your Windows PC, keep the downloaded file:
vex-nx-2.1.0.ova - Confirm you can open the ESXi Host Client at
https://YOUR-ESXI-IP/
Have these ready:
ESXi user Usually root Password The password for that user Datastore name For example datastore1 Port group name(s) For example VLAN93 Don’t have the OVA yet? Download VEX-NX and check its SHA-256 first.
- On your Windows PC, keep the downloaded file:
- 2
Clean up any failed deploy
- In the Host Client, cancel the Deploy OVF wizard if it’s still open.
- Delete any half-created VEX-NX virtual machine, including its disks.
A browser upload of a large OVA often stops with “A required disk image was missing”. That’s the problem this guide avoids.
- 3
Install VMware OVF Tool
- On the Windows PC, download VMware OVF Tool from the Broadcom (VMware) downloads site, then install it.
- It usually installs to
C:\Program Files\VMware\VMware OVF Tool\ovftool.exe, sometimes underProgram Files (x86).
Open Command Prompt and check it works:
Command Prompt"C:\Program Files\VMware\VMware OVF Tool\ovftool.exe" --versionIf that path isn’t found, try:
Command Prompt"C:\Program Files (x86)\VMware\VMware OVF Tool\ovftool.exe" --versionEither should print a line starting
VMware ovftool. - 4
Deploy the OVA
In Command Prompt, run this as one line, after editing the values in the table below:
Command Prompt"C:\Program Files\VMware\VMware OVF Tool\ovftool.exe" --acceptAllEulas --noSSLVerify --name=VEX-NX --datastore=datastore1 --diskMode=thin --net:bridged="VLAN93" --net:nat="VLAN93" --net:hostonly="VLAN93" "C:\Users\YOU\Downloads\vex-nx-2.1.0.ova" "vi://root@YOUR-ESXI-IP/"Replace With C:\Users\YOU\Downloads\vex-nx-2.1.0.ova the real path to your OVA YOUR-ESXI-IP your ESXi host’s IP address datastore1 your datastore name VLAN93 your port group name(s) - Press Enter, then type the root password when asked.
- Wait until it reports that the deployment completed successfully. This can take a while for a large OVA.
Three networks. VEX-NX has three adapters, in this order: Management (
--net:bridged), Internet for lab egress (--net:nat), and an isolated Lab network (--net:hostonly). Pointing all three at one port group works for a quick start; you can map each to a different port group instead. - 5
Check before power-on
In the Host Client, open VEX-NX → Edit settings and confirm:
- Hard disk 1 is present
- Hard disk 2 is present
- CD/DVD drive is present, with Connected on
- Three network adapters
- Under CPU, Expose hardware assisted virtualization to the guest is on
Only one hard disk? The deploy didn’t complete. Delete the VM and run Step 4 again.
- 6
Power on and sign in
- Power on the VM and open its Console.
- Wait for Starting, then the Management IP, then Ready.
- Open a browser at
https://<management-ip>/
Sign in to User Password Web UI admin vexnx Console / SSH vexnx vexnx You’ll be asked to change the password the first time.
You’re in. Launch your first lab.
Open Guided Labs, choose a Bronze lab, and press Start all. FRRouting and Alpine are already included.